Odin3 v3.11.2 is a small update to v3.11.1. You won’t see any difference when you open it.
The screen, the slots and the options are all the same.
Older version
Odin3 v3.11.2
Checked
| File | Odin3-v3.11.2.zip |
|---|---|
| Size | 1.00 MB / 1,003,037 bytes |
| Build | 2016.07.04.1 (product version 3.11.2.0) |
| Executable header | 32-bit Windows; minimum subsystem 5.1 |
| Archive contents | Odin3 v3.11.2.exe, Odin3.ini, README.txt |
| .lz4 firmware | Not supported |
febbb0ba51fe97ab576b12d8d782cfd012796e678a6abf08684cc3c2f2a4e4ceThis ZIP is hosted on getodintool.com. Compare the SHA-256 checksum after downloading.
What’s different in Odin3 v3.11.2
The version resource says 2016.07.04.1, but the compile date in the exe header is November 12, 2015, the same as v3.11.1. About 126 KB of the executable changed between the two.
You get BL, AP, CP, CSC and UMS, plus the Nand Erase All and T Flash options. The EXE records Windows subsystem version 5.1. PE header record
Before you open Odin3 v3.11.2
Since it looks and works like v3.11.1, the same setup applies. Unzip it, keep Odin3.ini with the exe, and open it from that folder.
The minimum subsystem version is a file-header value. I cannot confirm Windows 10 or 11 compatibility from that field alone. Check Samsung’s USB driver separately.
Compare the SHA-256 to check that you downloaded the copy listed here. A match does not establish that the program is safe. Keep Windows security checks enabled and review any SmartScreen warning before opening it.
When to use Odin3 v3.11.2
If a guide asks for v3.11.1 or v3.11.2, either one works for the same job. For current firmware, skip both and use v3.13.1 or newer.
T Flash writes the firmware to the SD card instead of the phone. Leave it off for a normal flash.
Phone not showing up in Odin? Reinstall the Samsung USB driver and try a different USB port.
Can’t decide between v3.11.1 and v3.11.2? Just tell me your model number on the contact page.