Odin3 v3.10.7 was compiled in May 2015, about six weeks after the Galaxy S6 went on sale.
Here’s what you should know before you grab it.
Older version
Odin3 v3.10.7
Checked
| File | Odin3-v3.10.7.zip |
|---|---|
| Size | 1.11 MB / 1,109,840 bytes |
| Build | 2015.5.26.1 (product version 3.10.7.1) |
| Executable header | 32-bit Windows; minimum subsystem 6.0 |
| Archive contents | Odin3 v3.10.7.exe, Odin3.ini, README.txt |
| .lz4 firmware | Not supported |
240e1ace55a79731af5751105c49352e8d1ab662227f3d507f369802078ff4aeThis ZIP is hosted on getodintool.com. Compare the SHA-256 checksum after downloading.
What’s different in Odin3 v3.10.7
The internal build number is 2015.5.26.1. It has the BL, AP, CP, CSC and UMS slots and the tabbed layout that started with v3.10.
Odin3 v3.10.7 is the earliest numbered build in this archive with Windows subsystem version 6.0 in its EXE header. The exe is bigger than in v3.10.5 and v3.10.6, and the ZIP drops the S1PlugIn bundle those two ship with. PE header record
Before you open Odin3 v3.10.7
The minimum subsystem version is a file-header value. I cannot confirm Windows 10 or 11 compatibility from that field alone. Check Samsung’s USB driver separately.
Compare the SHA-256 to check that you downloaded the copy listed here. A match does not establish that the program is safe. Keep Windows security checks enabled and review any SmartScreen warning before opening it.
Plug the phone in only after the Samsung USB driver is installed.
When to use Odin3 v3.10.7
Use it for older firmware when a guide for your device asks for v3.10.7. For current firmware you need v3.13.1 or newer.
Firmware from the Galaxy S6 days usually comes as one .tar.md5 file. Load it into AP and leave the other slots empty unless your guide says otherwise.
If you haven’t flashed before, read my Odin tutorial once before you start. It takes five minutes.
Got a question about v3.10.7 or your phone? Send me the model number through the contact page.